Golf Cart Lift Kits: Kit Types by Cart, Lift Heights and the Tire Each Kit Takes

Some links on this site are affiliate links: if you buy through them we earn a commission, at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.

You have picked the tires you want, and the kit list for your cart runs to a dozen part numbers that look alike. Which ones you can buy is set by your make and model year: each kit replaces parts from one front end. The tire limit on the kit settles the height.

A red Club Car Onward four-passenger golf cart with a lift and large alloy wheels
Photo: Club Car, LLC, CC BY-SA 4.0, via Wikimedia Commons (cropped)

At a glance

  • Kit type follows the cart: spindle for most carts, A-arm for Club Car, the RXV and Yamaha, drop axle for the E-Z-GO TXT.
  • Height follows the tire: read the maximum tire the exact kit lists, because makers disagree at the same height.
  • Before you drive it: the front wheels must be aligned, toe and camber.
On this page (7)

Which type of lift kit fits your cart?

What sits under the front of your cart decides the type. These are the types Jake's, MadJax and American Lift Kits sell, one of the first upgrades owners fit.

  • Spindle: replaces the stock front spindles; sold for every make below.
  • A-arm: new front arms with adjustable toe and camber. Club Car, E-Z-GO RXV, Yamaha.
  • Drop axle: replaces the front axle, E-Z-GO TXT only.
  • Block lift: Jake's 4 in kit for the 1994.5 to 2001.5 Medalist and TXT.
  • Carrier: American Lift Kits' RXV kit, adds camber adjustment and 2 in of track width.
  • Long travel: American Lift Kits' made-to-order TXT kit with adjustable nitrogen shocks.
  • Lo-Pro: a small Precedent lift (MadJax 16-013, Jake's 95560) for 12 and 14 in low-profile wheels.

King XD and King Bolt are MadJax line names, not types.

Which kits fit your make and year

Find your cart and year, then pick among the heights listed.

Cart and yearsKits the makers list
E-Z-GO TXT 1994.5 to 2001.5Jake's spindle kit (6211 gas, 6212 electric), 4 in block lift
E-Z-GO TXT 2001.5 to 2013.5Jake's 6 in spindle (6208 electric 2001.5 to 2013.5, 6207 gas 2001.5 to 2009, 7061 Kawasaki gas 2008.5 on); American Lift Kits 4 in spindle, 4 in drop axle, 6 in long travel
E-Z-GO TXT 2013.5 onJake's 6 in spindle (7515)
E-Z-GO RXV 2008 to 2013Jake's 3 in spindle; MadJax 6 in A-arm
E-Z-GO RXV 2014 to 2021Jake's 6 in spindle, gas and electric
E-Z-GO RXV electric 2013.5 to 2022, built before 9/6/22MadJax 4 in King Bolt
E-Z-GO RXV 2008 onAmerican Lift Kits 2.5 in spindle, 4 in carrier, 6 in spindle
Club Car Precedent 2004 onJake's 3 in and 6 in spindle; American Lift Kits 3, 4 and 6 in A-arm; MadJax 4 in and 6 in King XD; Lo-Pro
Club Car Onward and TempoMadJax 4 and 6 in King XD; American Lift Kits 4 in A-arm (Onward)
Club Car DS 1984 onJake's 6 in spindle 6231 to 2003, 6234 for 2003 on; MadJax 3.5 and 6 in A-arm
Yamaha G29 and Drive 2007 to 2016Jake's 3 and 6 in spindle; MadJax 4 in King XD (solid rear axle) and 6 in A-arm
Yamaha Drive2 2017 onJake's 3 and 6 in spindle; American Lift Kits 4 and 6 in A-arm; MadJax 4 in King XD (16-061 solid rear axle, 16-062 gas with independent rear suspension)

For an RXV built after 9/6/22, an RXV 4, or an electric Drive2 with independent rear suspension, check the kit maker's fitment list against your serial number before ordering.

Our picks

Tip: Jake's splits its Precedent, RXV and DS kits by the front hub dust cover: black plastic on the Precedent, metal on the RXV and DS.

How high to go, and what tire each lift takes

Decide the tire first, then buy the kit that carries it. These are the maxima Jake's, MadJax and American Lift Kits print.

CartKit and heightLargest tire the maker lists
PrecedentJake's spindle, 3 in / 6 in22 in / 23 in
PrecedentMadJax King XD, 4 in / 6 in20 in / 22 to 23 in
PrecedentAmerican Lift Kits A-arm, 3 / 4 / 6 in20x11-10 / 22x11-10 / 23x10.5-14
RXVJake's spindle, 3 in / 6 in22x11 on a 10 in wheel / 25 in
RXVMadJax King Bolt 4 in / A-arm 6 in20 to 22 in / 23 in
RXVAmerican Lift Kits 2.5 in spindle / 4 in carrier / 6 in spindle20x11-14 / 23x10.5-14 / 23 in
TXTJake's 6 in spindle25 in
TXTAmerican Lift Kits 4 in spindle / 4 in drop axle / 6 in long travel22x10.5-12 / 23x10.5-14 / 24x10-12
Yamaha G29 and DriveJake's 6 in spindle23 in
Yamaha G29, Drive, Drive2MadJax King XD 4 in20 to 22 in
Club Car DSJake's 6 in spindle23 in, with the extension plate

No maker recommends a height; the tire decides it. American Lift Kits prints the 6 in Precedent maximum as 23x10.5-14 on its 3 and 6 in pages and 23x10.5-12 on its 4 in page, so read the page for the kit you are buying. Several kits also need new wheels: 10 in minimum, offset rims, and no stock wheels or tires on Jake's DS kit, so settle wheel size and offset in the same order.

Tip: At the same height on the same cart, limits differ: Jake's lists 25 in on its 6 in RXV spindle kit, American Lift Kits 23 in. Trust the figure on the kit you are buying.

What a lift changes on the cart

The cart makers' own lifted models show the size of the change.

  • Club Car Onward 4 Passenger, standard against lifted: ground clearance 4.5 in to 6.4 in, front track 35.75 in to 40.75 in, wheelbase 65.5 in to 67.5 in.
  • E-Z-GO RXV 4, standard against factory lifted: ground clearance 4 in to 6.75 in, overall height 47 in to 55.5 in, turning radius 9.6 ft to 12.2 ft.
  • E-Z-GO tells you not to modify a cart in a way that alters weight distribution, decreases stability or raises speed beyond factory specifications.
  • With a King Bolt or King XD kit, add the 30 lb front counterweight kit MadJax recommends with them for steering stability.

Speed changes with the taller tire, not the lift, so the tire size you choose matters more than the height.

What a lift does to the warranty

Your warranty is the cart maker's, not the kit maker's. On an E-Z-GO RXV you lose it if you modify the cart for more speed or power, and you can lose it if the parts you fit are not original or equivalent. On a Yamaha, non-original parts and changes that affect how the car operates are excluded.

Neither bans lift kits, and no lift voids a warranty by itself; on a cart still in warranty, call your dealer before you order.

Can you install it yourself?

Most owners with hand tools and a way to raise the cart can, if they finish the job properly.

  1. Set the parking brake, chock the rear wheels, raise the cart on a lift and support it on jack stands.
  2. Fit the kit with hand tools: American Lift Kits prints a do-not-use-power-tools warning on its kits.
  3. Trim only where the maker calls for it: Jake's lists the rear skirt and fenders for 21 to 23 in tires on a G29 or Drive, American Lift Kits the Drive2 rocker panels.
  4. Align the front wheels: set toe so the front measurement is 1/4 to 3/8 in greater than the rear, and set camber square to the ground where the kit adjusts it.

MadJax warns that a lifted cart whose front wheels are not properly aligned can be harder to control and may roll over or crash. If you cannot set toe and camber, have a shop align the cart before you drive it.

Common questions

Does Club Car make its own lift kit?

Yes. Club Car sells a Precedent lift kit, part number AM15009001, and its approved tire matrix marks the tire rows that require it.

Is a 2.5 inch lift really 2.5 inches?

Not always. American Lift Kits says its 2.5 in RXV spindle kit adds enough to equal almost 5 in of lift. Judge a kit by the maximum tire it lists, not its title.

Is there a lift kit for a 2022 or newer E-Z-GO RXV?

The makers draw the line in different places: American Lift Kits prints "2008 - Present" on its RXV spindle and carrier pages, while MadJax stops at carts built before 9/6/22. Confirm the kit against your serial number with the seller.