You want to drive to the clubhouse at dusk, and the cart came with no headlights. Kit makers build light kits for each common model and year, gas or electric. On an electric cart what matters is how the kit gets the low voltage the lamps need, and the method the cart makers describe takes it from the whole battery pack.
Golf Cart LED Light Kits: What Fits Your Cart and How the Lights Get 12 V
Some links on this site are affiliate links: if you buy through them we earn a commission, at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.
At a glance
- What fits: a kit listed for your model and year; current MadJax kits cover gas and electric carts and include a converter.
- How the lamps get power: a converter across the whole pack, as E-Z-GO's manuals call for; tapping one or two batteries is the older kit method.
- Street use: lights are one item on a longer list, and night driving depends on your state and city.
On this page (5)
Our picks
- Club Car Precedent, 2004 on: MadJax light bar kit (part 02-045)
- E-Z-GO Freedom TXT / T48, 2014 on: MadJax light kit (part 02-048)
- E-Z-GO RXV, 2008 to 2015: MadJax light kit (part 02-047)
- Yamaha G29 / Drive, 2007 to 2016: MadJax light kit (part 02-049)
- Yamaha Drive2, 2017 on: MadJax light kit (part 02-058)
Which kit fits your cart
Kits are sold by model and year range; the mounting holes and dash differ on each body. These fitments come from MadJax's product pages.
| Cart | Years | Kit |
|---|---|---|
| E-Z-GO RXV | 2008 to 2015 | 02-047 |
| E-Z-GO RXV | 2016 to 2022 | 02-046 |
| E-Z-GO Freedom TXT / T48 | 2014 on | 02-048 |
| E-Z-GO S4 | 2015 on | 02-059 |
| Yamaha G29 / Drive | 2007 to 2016 | 02-049 |
| Yamaha Drive2 | 2017 on | 02-058 |
| Club Car Precedent | 2004 on | 02-044 light bar and taillights, 02-045 light bar kit |
| Precedent or Tempo with the MadJax Alpha body | 2004 on | 02-130 |
Each one is listed for gas and electric carts and comes with a built-in voltage converter and a 7.5 A 12 V accessory connection in the dash. If you are not sure of your year, read the serial plate; the brand guides show where each maker puts it. Yamaha lists LED headlights and taillights as an option on the 2027 Drive2, and the 2014 and later E-Z-GO TXT 48 key switch has a third LIGHTS position for optional front and rear lights.
How a 12 V kit runs on a 36 V or 48 V cart
The lamps are a 12 V system, and MadJax says supplying more than 12 V damages the kit and voids its warranty. Its Precedent sheet says the 48 V connection without a reducer or converter causes bulb failure. Three methods appear in the makers' documents.
| Method | How it connects | Who describes it | What to watch |
|---|---|---|---|
| Converter from the whole pack | Red fused wire to the pack positive, black to the pack negative, then the harness to the converter | E-Z-GO TXT 48 V guide, RXV ELiTE, RXV 4 and Valor manuals; MadJax Ultimate Plus kits | MadJax says it must be used on 36 V and 48 V electric carts, and is not needed on gas carts |
| 16 V to 12 V reducer across two batteries | Reducer across two 8 V batteries wired in series, harness to the reducer | MadJax's older Yamaha Drive and Freedom TXT sheets | The 2014 Freedom TXT sheet says the lamps work on 16 V but bulb life is shortened |
| Tap across one battery | Harness across one battery in a pack of four 12 V batteries, or a fused tap on a Precedent with no factory converter | MadJax's older Yamaha Drive and Precedent sheets | A retailer selling these parts warns that tapping one or two batteries can damage the batteries and the accessory; on a Precedent the tap must be fused |
E-Z-GO's guide has one rule for every accessory on an electric cart: ground it directly to the battery negative post, never to the chassis or body. That is the argument for the whole-pack converter, and if your kit does not include one, fit a converter rated for your pack voltage, such as the Pro Chaser 36 V / 48 V to 12 V 30 A converter. Your own layout is printed on the battery labels under the seat.
Can you install it yourself?
MadJax recommends professional installation and says the job involves drilling holes in the cart body, so decide first whether you want to cut your own bodywork. If you go ahead, the sheets have you prepare the cart first, and it is one of the simpler cart upgrades to fit once the pack is safe.
- Turn the key off and put the TOW/RUN switch in TOW.
- Disconnect the main negative cable. The batteries stay in place.
- Lift the cart and support it on jack stands before working underneath.
- Mount the converter or reducer flat under the seat on a metal surface. GTW's reducer sheet says the unit gets hot and can melt plastic.
Every connection at the battery pack is made with that main negative still disconnected. If you are not sure which posts are the pack positive and negative, stop there and have a technician make those two connections.
Lights alone will not make the cart street legal
A light kit covers part of one equipment list, not the whole thing. The federal low-speed vehicle rule requires headlamps, front and rear turn signals, taillamps, stop lamps and red reflex reflectors, alongside other equipment. E-Z-GO's TXT guide adds that a cart modified to run at 20 mph or more becomes a low-speed vehicle, and the dealer must then fit lights, turn signals, seat belts, a top, a horn and a VIN. E-Z-GO does not approve that conversion.
Night driving is a local decision too. Florida allows a golf cart between sunset and sunrise only where the responsible government has decided carts may run at those hours and the cart has headlights, brake lights, turn signals and a windshield (checked 2026). Counties and cities add their own rules. The street-legal route is a different project from a light kit.
Common questions
Do I need a voltage reducer for lights on a gas golf cart?
No. MadJax's sheets for the Ultimate Plus kits say the included converter is not needed on gas carts, and they describe no other wiring step for a gas cart.
What size voltage reducer do I need for golf cart lights?
Match the input to your pack and the output amps to the load. Retailer listings put a 10 A reducer at one or two basic accessories such as LED lights, with 20 A and 30 A units above it. No kit maker publishes the lamps' amp draw.
Will an aftermarket light kit void my golf cart warranty?
It can. Yamaha's Drive PTV manual excludes parts and accessories that are not original equipment, and modifications affecting the car's condition or operation, from its limited warranty. Read your own warranty booklet before fitting a kit to a cart still covered.